Original
By certification 
If you are planning to wholesale high quality scaffolding pipe from one of the leading scaffolding pipe manufacturers and factory, please feel free to contact us.
ERW Transmission Pipe
ERW Transmission Pipe: standard: API 5CT,API 5L, ISO 3183, EN 10217-1, Transmission Pipe: Use For conveying gas, water and oil either in the oil or natural gas industries
Dimensions:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
End:square ends (straight cut, saw cut, and torch cut). or beveled for welding, beveled,
Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy,Fusion Bond Epoxy, 3-layers PE)
Packing:Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips, Plastic caps.
Test:Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.
Third party inspection:SGS, BV, Lloyds etc.
WELD: OD: 21.3mm-660mm WT: 1mm-20mm
Chemical Analysis (%):
Type of pipe | Class | Grade | C | Si | Mn | P | S | V | Nb | Ti |
max | max | max | max | max | max | max | max | |||
WELD | PLS1 | L245 B | 0.26 | - | 1.2 | - | 0.03 | 0.03 | - | - |
L290 X42 | 0.26 | - | 1.3 | - | 0.03 | 0.03 | - | - | ||
L320 X46 | 0.26 | - | 1.4 | - | 0.03 | 0.03 | - | - | ||
L360 X52 | 0.26 | - | 1.4 | - | 0.03 | 0.03 | - | - | ||
L390 X56 | 0.26 | - | 1.4 | - | 0.03 | 0.03 | - | - | ||
L415 X60 | 0.26 | - | 1.4 | - | 0.03 | 0.03 | - | - | ||
L450 X65 | 0.26 | - | 1.45 | - | 0.03 | 0.03 | - | - | ||
L485 X70 | 0.26 | - | 1.65 | - | 0.03 | 0.03 | - | - | ||
PLS2 | L245M BM | 0.22 | 0.45 | 1.2 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | |
L290M X42M | 0.22 | 0.45 | 1.3 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | ||
L320M X46M | 0.22 | 0.45 | 1.3 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | ||
L360M X52M | 0.22 | 0.45 | 1.4 | 0.025 | 0.015 | - | - | - | ||
L390M X56M | 0.22 | 0.45 | 1.4 | 0.025 | 0.015 | - | - | - | ||
L415M X60M | 0.12 | 0.45 | 1.6 | 0.025 | 0.015 | - | - | - | ||
L450M X65M | 0.12 | 0.45 | 1.6 | 0.025 | 0.015 | - | - | - | ||
L485M X70M | 0.12 | 0.45 | 1.7 | 0.025 | 0.015 | - | - | - | ||
L555M X80M | 0.12 | 0.45 | 1.85 | 0.025 | 0.015 | - | - | - |
Mechanical Properities:
Standard | Class | Grade | Yield strength not less than (MPa) | Tensile strength (MPa) | Elongation(%) | Y.S/T.S | |
| PLS1 | L245B | min | 245 | 415 | b | - |
L290X42 | min | 290 | 415 | b | - | ||
L320X46 | min | 320 | 435 | b | - | ||
L360X52 | min | 360 | 460 | b | - | ||
L390X56 | min | 390 | 490 | b | - | ||
L415X60 | min | 415 | 520 | b | - | ||
L450X60 | min | 450 | 535 | b | - | ||
L485X70 | min | 485 | 570 | b | - | ||
PLS2 | L245N BN | min | 245 | 415 | b | - | |
L245M BM | max | 450 | 760 | b | 0.93 | ||
L290NX42N | min | 290 | 415 | b | - | ||
L290MX42M | max | 495 | 760 | b | 0.93 | ||
L320NX46N | min | 320 | 435 | b | - | ||
L320MX46M | max | 525 | 760 | b | 0.93 | ||
L360NX52N | min | 360 | 460 | b | - | ||
L360MX52M | max | 530 | 760 | b | 0.93 | ||
L390NX56N | min | 390 | 490 | b | - | ||
L390MX56M | max | 545 | 760 | b | 0.93 | ||
L415NX60N | min | 415 | 520 | b | - | ||
L415MX60M | max | 565 | 760 | b | 0.93 | ||
L450MX65M | min | 450 | 535 | b | - | ||
max | 600 | 760 | b | 0.93 | |||
L485MX70M | min | 485 | 570 | b | - | ||
max | 635 | 760 | b | 0.93 | |||
L555MX80M | min | 555 | 625 | b | - | ||
max | 705 | 825 | b | 0.93 |
Toughness:
Standard | Grade | Transverse minimum impact of Pipe body | Transverse minimum impact of weld (J) | |||||
(J) | ||||||||
D≤508 | 508mm | 762mm | 914mm | 1219mm | D<1422mm | D=1422mm | ||
API SPEC 5L | ≤L415×60 | 27(20) | 27(20) | 40(30) | 40(30) | 40(30) | 27(20) | 40(30) |
>L415×60 | 27(20) | 27(20) | 40(30) | 40(30) | 54(40) | 27(20) | 40(30) | |
≤L450×65 | ||||||||
>L450×65 | 27(20) | 27(20) | 40(30) | 40(30) | 54(40) | 27(20) | 40(30) | |
≤L485×70 | ||||||||
>L485×70 | 40(30) | 40(30) | 40(30) | 40(30) | 54(40) | 27(20) | 40(30) | |
≤L555×80 | ||||||||
Note:(1)The values in the table be suitable for the full size standard sample.
(2) The values inside bracket is the minimum single value, outside bracket is the average value.
(3) Test Temperature: 0°C.
Available Dimension Range: Φ21.3~660*1~20mm
